Price $
Home > Boston buy, sell, trade > Boston boats/motorcycles

Posted: Thursday, October 12, 2017 8:46 AM

Below is a list of things which “MUST go.” This is a private party, “FLEA Market sale.” If you want a call, be sure to include your ten-digit telephone number. The prices are LOW, because I want to “clean things out” of my cellar, as fast as possible. Most items are in the Plaistow, NH area.

Furuno Color Video Sounder: This is new unit, Model FCV-66?, in the original box. Original cost was $1275. Only $225 or best offer.

Marine Binoculars: This is a NEW, never used, Pro Mariner, Gulf Steam GS30, 7x50 RC, Illuminated, waterproof, fog proof unit, with a range finder. It is still in its original box, too. Original cost was $259. Only $125 FIRM.

Maptech Chart Navigator, standard edition. This is everything a boater always wanted, together in this one box. This is new, unused, and still in it’s unopened box, for only $150, or best cash offer (Original cost was $275.95). Maptech's Chart Navigator Standard is a full-featured GPS planning and charting software for laptops and PCs. Chart Navigator Standard includes Raster NOAA Charts of the entire U.S. Coast and Army Corps of Engineers' Inland Waterway Charts, as well as satellite photos, aerial photos, and coastal topographic maps. Chart Navigator Standard also has on-screen display of marine facilities. Included is the Maptech Offshore Navigator program, which provides the tools for route planning and navigating in real time, plus tide and current information for U.S. waters. Chart Navigator Standard can be interfaced with GPS, autopilots and other NMEA 0183 instruments. Create Routes, Manage Waypoints, View Charts, Tide Forecast, FREE chart updates, etc.

Propeller: Rapture 14 1/2" x 17" stainless prop that is like new, for only $125, instead of the $150 posted, if you can get it quickly.

Anchors and ½” Nylon line: Danforth Model 12 H anchor (for 20’ to 43’ boats), and 75’ of ½ “ nylon line. Only $75 (new cost was $245 for the anchor alone).

Anchor line: New, 100’ of ½” nylon anchor, or docking line. Only $25. (New cost was $78.50)

Alcohol stove: This is a two-burner, stainless steel alcohol compact stove. Only $75. (New cost was $679)

Mercury 4.5 hp short shaft outboard: This is a seldom-used, two-stroke cycle outboard, (serial no. 48X0408) with a two-bladed prop. The dust is from being in dry storage. Only $395, or best offer. (It normally retails for over $1250)

Mercruiser 4.3, V6 inboard/outboard engine. This is a fully-marinized 1989 engine, completely assembled. It would be great for parts, as I don't know if it runs or not. Just the Carb, or oil pan, etc., are worth OVER $450 each. Be sure to include your phone no.

21' EZ Loader galv. trailer. It had a 20' power boat on it. It is the heavy-duty, 3" x 4" box framed design, on a single axle (with heavy duty 14" tires) which makes maneuverability MUCH easier, and avoids the tires "scuffing" on turns, etc. It comes with a dolly jack stand, winch etc. Only $1275 or best offer (Reduced from $1495). It's best to include your phone no.

22' Shoreline Galvanized V trailer, with a 3" x 4" extra-rugged galvanized frame, and 14" galvanized wheels on a single axle. Because it has the extra, heavy-duty frame and bigger tires, it carries the same load as tandem, without the extra cost of a second axle. A single axle is MUCH more maneuverable and you don't have to worry about "scuffing the tires" on corners, etc. It measures 25' long and has six feet between fenders. The extra tongue length provides a wonderful "safe zone" between the back of vehicles which have a "blunt back," such as pickup trucks, vans, etc., which avoids the winch stand "impaling the vehicle" on turns. Although not shown, it has a NEW set of lights and harness. Only $995 (Reduced from $1295, because I want gone ASAP.)

19' Lightning sail boat...for only $2200, FIRM! (Reduced from $5250, for a quick sale). This is a ONE-owner, CUSTOM-built boat, where most Lightings are production built boats! It's a light blue, fiberglass hull (in the 14,000 series), with aluminum spars, Dacron sails, etc. It needs a good buff, as it has not been in the water for three years. The boat has never been raced or stressed; it was only used as an "adult-only," family boat. It even has a heavy-duty, custom-fabricated rudder, with a tiller extension. Regarding a trailer: My friend has a galvanized trailer available, which was custom-designed for a Lightning which has an extra-wide galvanized axle and a terrific set of “maximum-security, hold-downs,” custom-designed to hauling this Lightning, which is available, for only $395, if you purchase my lightning. Otherwise he wants $1800 for the trailer, which retailed for $2400. (Other things to “Keep in mind,” is the fact that just the custom items, which go with this Lightning. are worth more than the price which I am asking for everything: The mast and boom alone, are worth $2200, the Main and Jib retailed over $2600, the custom-made s/s centerboard cost $1,300 and the custom-made rudder cost $925) My boat price is less than half its real market value, which is OVER $5200 and that can be easily verified, as you know. The price is low, because I am moving, and it needs a $295 repair……….therefore, I would like to have it removed ASAP.

Swim platform: This is a good-looking wooden unit with a terrific, matching wood and stainless steel ladder. It measures 17" x 81" and comes with all the mounting hardware (which is worth $275). Only $475 for everything, or best offer. It was mounted on a 22' power boat.

Mercruiser “tilt & trim” assembly, for only $195. (New is worth over $500)

Mercruiser 350 inboard engine. This is an excellently running, NEW Mercruiser 350, completely assembled engine, which was purchased from an authorized Mercruiser Dealership. It only has approximately 395 hours on it now. This is the fuel-efficient, two barrel carburetored engine, and it is in perfectly good, running condition. The engine was just tuned up, filters changed, the carburetor re-built, etc. Only $2795. (The price I paid to the installing, Mercruiser dealer, for this new engine, was $9350.) There is NOTHING wrong with this low-hour, faultless engine. You can hear it run, or "we can take it for a ride." When replying, you MUST include your phone no.

Merc Propeller: Stainless 3-blade, 14.25” x 17”, only $159. (New price was $349)

Merc. Propeller: Aluminum 3-blade, 14.5” x 17”, only $59. Part No. 48-78118. (New was $150)

Docking line: One new, 3/8” x 25’ double-braided line. Only $19 (New was $30)

Battery Charger: A Pro Mariner, 20 amp. charger. Only $75.

Shore Power Pigtail Adaptor: A Marinco, 50 amp male, to one 30 amp female. Only $125.

Shore Power Pigtail “Y” adaptor: A Marinco 50 amp male to two, 30 amp females. Only $149. (New cost was $481.95)

Mercruiser 140 inboard engine. This is a completely assembled engine. It may have a crack in the block, but I don't know for sure. It is being sold as you see in the photo and as a "parts only" engine, for only $295. Obviously, its parts are worth MUCH more than the price I am asking. I just want it removed ASAP. It's out of the boat and ready to be picked up ASAP.

1990 Crestliner 18’ bow rider with a custom, galvanized trailer. The boat is very salvageable, and the trailer has 14” galv. wheels and a Dolly Jack stand. The trailer measures 20’ long, with 87” between fenders. The trailer alone is worth $950. The price is low because it has no sterndrive, and the 6-cyl Mercruiser engine’s health may need some work. Only $950 for everything, or best offer.

21’ Galvanized EZ Loader roller trailer, with 14” galvanized wheels and axle. It measures 23’ length over all, with a wide, 78” between fenders, with the heavy duty 3” x 4” frame. This is an “all-roller-trailer,” with hydraulic brakes and a fully adjustable undercarriage to accommodate the necessary balance. Only $1295, or best offer.

1987 Invader 19’ Bow Rider with a with a color-keyed Trailmaster trailer. It comes with a spare tire and wheel and a “dolly jack stand” for ease of maneuverability. The boat needs TLC and a power train. Only $950, or best offer.

OMC V-8 Engine and Cobra transom assembly. This carbureted engine is fully assembled with new risers, exhaust manifolds, etc. It is completely intact (circa 1989?). It has been in storage for two years. I am selling it for only $750 as is. The OMC transom assembly includes all the hoses, pistons, etc., for only $750. You may have everything above for only $1375 (which saves you $1000 dollars). You MUST include your phone no., to expedite things. The prices are low because I want things removed ASAP.

17 ½’ Wellcraft cuddy I/O boat. It has a Merc. 4 cyl. engine, an Alpha I sterndrive and a trailer. I don’t know the engine’s condition, but I was told it ran, a few months ago. Only $1495 or best offer, as is.

1995 Mercruiser 4.3, V6 inboard engine completely assembled. It is FULLY assembled, with everything intact. It is out of the boat. It has a four barrel carburetor, and was attached to an Alpha I sterndrive. Only $795. The price is low because it may need a water gasket as there was some water in the oil (which has been cleaned and changed) and I want it removed ASAP.

1988 Mercruiser 350/V8 Vortec intake manifold: This was on a 1990 Mercruiser 350/V8 engine. Only $95 (New cost was $205)

Alpha Sterndrives: I have two: 1) An Alpha I, Gen I,which was attached to a V8, for only $495 (dropped from $700), and 2) An Alpha I, Gen II, which has only 95 hours on it, with a 1:84 ratio and it was attached to a V6, for only $975 (down from $1375)

House, with a house lot, in Newton, NH for sale: This property already has a 3 bedroom ranch house which has new electrical wiring, insulation, roof replacement, interior renovations, such as windows & doors, new bathroom, lovely fireplace, along with a gorgeous "herring bone, brick patio," and a two-car concrete parking slab. Additionally, this property includes one acre of buildable land, in a terrific location on a rural highway, for only $229,900 (This represents a $50,0000 savings to you, as the price was just reduced from $279,990 to expedite a sale). As with any house, renovations are always a consideration to make things better. The price is low because I am moving. This is a private, by-owner sale, which avoids brokerage fees--unless, of course, you prefer to absorb that cost to utilize one. However, you may contract with your own broker, at your expense, if you prefer. All inquires MUST include complete contact information, including your ten-digit phone no., to expedite contact.

Bravo I Gimbal Housing: This is a clean, fresh-water Bravo Magnum gimbal housing assembly with pistons, etc.. A $2795 value for only $1350, or best offer.

SHIFT & THROTTLE Lever assembly: This is the heavy-duty, “top mount” Morse single-lever, dual-function control for BOTH the shifter and the throttle control assemble, which is so smooth and easy to operate. It was used on a 24’ powerboat, with a Mercruiser engine and sterndrive. $125.

Trim tab Assembly: This is the Bennett trim tab kit, with controls, wires, tabs and pump. Only $150 for everything.

Tilt and Trim assembly, with pump, bracket, etc. It was use on a Mercruiser sterndrive. Only $150, with the bracket, too.

Instrument panel. $35. It was used for a Mercruiser 350, and includes all gauges

Mercruiser Inner transom Plate: Only $95 for two, or $75 for one.

Mercruiser Outer transom assembly. Includes: Outer transom Plate, “helmet,” hoses and pistons. $195. Or, you may have just the Pistons for $150.

Mercruiser “Gimble Housing assembly,” – There are two types: 1) One for an Alpha I, Gen I, sterndrive assembly. Only $395 (new cost is $1725), and 2) One for an Alpha I, Gen II sterndrive assembly, for $495.

Mercruiser Propellers: Each was attached to a V-8, but they work for other Mercruiser inboards and outboards, too.
Mercury 3 blade aluminum prop, just rebuilt, 15 ¼” x 15” -- Mercury number 48-78116-15. Only $75. and a
14 ½ x 17, two-piece prop, for $25 (it needs renovation).

Mercruiser 4" Thru-hull Exhaust Tips: This is a pair of the HEAVY duty, 90º cast BRONZE tips, which were attached to a Mercruiser 350 inboard engine. The internal "butterfly" valves were removed to decrease the "exhaust resistance," and to enhance the "sound of power." (External "4" flappers" will prevent "backflow.") New cost was $429 for the pair. You may have one, for $50, or both for only $85.

BATTERY CHARGERS: 1) Pro Mariner 20 amp used, for only $75. 2) Pro Mariner 20 amp NEW, and still in the original box, for only $195 (New cost was $289.95)

WINDSHIELDS: I have two types and each has flat glass in them. 1) The “walk-through” design, which was attached to a 1988, 21’ Stingray bow rider for only $295 (New cost is $1595). 2) The “NON, walk-through” design, which was attached to a 1988 Mach I boat (which is nearly identical to those used on the Formula boats) for
only $495 (New cost is $2875)

SWIM PLATFORMS (TWO): 1) This is the beautiful teak-wood model, with “flow through” slats, which permits water to disperse immediately. It measures 72” (6 feet) by 18 ¼”, and includes Stainless Steel Brackets. It was attached to a 21’ flat transom pleasure boat. Only $295 for everything (New cost is $1975). 2) This is a longer,
teak model, measuring 80” x 16” , and it has a stainless ladder, with brackets and fasteners. Only $325 (new cost
was OVER $2300 base price, with the ladder, brackets and fasteners at EXTRA cost.)

Remote “Fuel-water Separator” kit, assembly and bracket.” Only $25. (a $300 value)L

Alpha I, gen 1, Gimbal Housing “INNER transom plate.” I was told it may fit Alpha I, 4cyl, 6cyl, V8--” Good condition and ready to install. I have two. Only $45. New cost is $185.95

MerCruiser Power tilt and trim assembly. Only $275 (This retailed for $725, plus S & H)

MerCruiser GIMBAL HOUSING "transom plate," with bushings, for an Alpha I sterndrive. $75.

MerCruiser EXHAUST "Y" PIPE: Only $55 (New is over $450) it came off of a Mercruiser 350 engine.

MerCruiser V-8 engine water hoses: These are the TWO, molded hoses which connects the "thermostat horn housing, to the exhaust manifolds. Only $8 each, or get both for only $10 total.

Mercruiser heads: I have two, “305- heads,” with valve covers (perimeter bolt pattern), for only $150 total price for everything. B/B

Alpha gen 1 Transom Assembly gimbal housing: This is a good, ready-to-install assembly, which was attached to a Mercruiser 350, and an Alpha I, Gen I sterndrive. Only $795 (New cost is $1,959.95) B/B-Celebrity85

Mercruiser 454 engine parts: 1) Oil Pan for only $25; 2) Wiring harness, only $25; 3) and other misc. parts.

Mercruiser “power tilt and trim” sterndrive unit. Only $275 or best offer (New is $485)

MARINCO "Pig tail adapter:" This is a new, "50 Amp male--to 30 Amp female adapter. Only $125 (new cost was $245)

Marinco 50 Amp “Y-adaptor,” which splits into two, 30 amp “locking female,” ends. This is the HEAVY-duty (600 stw volts), Marine Electrical Shore Power "Y" Adapter (50-Amp 125/250-Volt Locking Male to Double 30-Amp 125-Volt Locking Female with Sealing Collar System, Yellow). New cost is $398. Only $150

POWER DISTRIBUTION PANEL: This is a 3-position accessory panel, pre-wired w/15A breakers with "backlit labels." Mfg. by Blue Sea (PN 8025), it lists for $255. Only $75, and this one is new and still in its unopened package.

Custom-built, teak swim platform, with custom, “Safety Drainage Slots,” for quick water dissipation. It measures 83” long, by 19 ½ “ wide, by 1 3/4” thick, and it comes with a stainless steel “drop-down, single-step ladder attached to it. Only $395, or best offer (This one retailed for $1,150, plus S & H)

COMPLETE INSTRUMENT CLUSTER. This was removed in one, very nice section, from a 1990 Chaparral boat, that had a MerCruiser 350/V-8 engine in it. It includes the tilt, gas, alternator, fuel, water, speed and tach gauges, and has all the factory cabling and Mercruiser quick-connectors. Price is only $45 complete. (A $$325 value)

Pedestal seat with adjustable base support: I have ONE, off-white in color, it includes a swivel base mount and slide (a $120 value). Only $50.

Propeller: Three-blade, stainless steel, 14.25” x 20 pitch, Alpha I propeller. It was removed from a Mercruiser Alpha I, Gen. I sterndrive, which was attached to a 5.7 L----V-8 engine. Only $95. (New cost was $478)

Water Temperature Gauge. This is a NEW, still-in-the-plastic package, Teleflex (PN: 57904P). White & red graphics on a black dial background. Very low profile bezels follow the curve of the lens to eliminate water trapping. Pointers are white w/black hub. Thru-dial & perimeter lighting provides excellent night visibility. Conventional mounted. Only $12. (New is $31.95) B/B

MerCruiser Power tilt and trim assembly. Only $250 (This retailed for $525, plus S & H)

Zinc hull plate: A new, never mounted, 12” hull zinc. This one will last a long time, on either a boat, or a dock. Only $5 (Retail is $22)

Alpha I, transom assembly. This is a clean, neat and fine-operating transom assembly, which comes complete with “the helmet,” hoses and cylinders. Only $450, or best offer. (New units cost $2100, and the trim cylinders cost $300 per pair, plus S & H and taxes.) G/O

Boat Fenders: I have sizes for all boats ranging from 12’ to 45’—two, white 6” x 15” thru-hole style at $20 each---two, black 6” x 15” thru-hole style at $20 each---one white and two RED, 6” x 15” “eye-end” style at $15 each---one, white 7” x 22” eye-end style $25 each---two, white 8” x 20” thru-hole style at $25 each-

Bow Rails: This is a stainless bow rail, which was removed from a 22’ boat. It is $2400 value, for only $150.

Tire mounted on 12” galvanized wheel. This is a tire and double-dipped galvanized, four-lug wheel…only $45.

Battery Cables, heavy duty marine grade copper cables with eyelets: 4’ lengths $20 pair. 8’ lengths $35 pair.

INSTRUMENT panel: This is a rectangular panel, which is approx. 8” x 21" in rectangular shape. It looks good, with the modern-type of gauges, of which there are seven gauges: Oil, Water, Trim, Battery, Fuel, Speed and Tach. Only $39 (This is a $325 value)

COMPASS: This is a 4", direct-read, bracket mount Richie compass, with a light. $35.

Stainless steel swim ladder: It is meant to fit on either side of a sterndrive. The platform is approx. 2' wide, with twin hand rails and a folding, one-step, drop-down ladder. $45

Fiberglass swim ladder, with a nice, “telescoping ladder,” which folds up, and out of the way. It’s a complete unit, which cost $850, when new. Only $125.

DECK HATCHES: I have two good, identical foredeck hatches that list for $475 each. Each one is in good condition, and ready-to-be-installed into a 24" X 24" opening. I will sell them for $95 each or both for only, for only $175.

MOORING LINES: I have three used, and strong holding, nylon three-strand lines, for only $2 each. 5/8" x 30', and 2 of the ¾" x 30' sizes. (each is worth over $25)

Velvet Drive (Borg Warner) marine transmission (gear) (an "in-line" marine transmission), 2.57 to 1 ratio, direct drive transmission (it was attached to a 454 MerCruiser, which MAY make it a model 1018), in perfect condition. New cost was $4375, and a re-built, with an "exchange core," was $1895. However, only $950 CASH/or best offer, as I need the space ASAP.

23' Mach I cabin boat. This is a 1988, Formula-type boat, with a clean and nice cuddy cabin, a wet sink, AND a dry sink, custom drop-down "bolster seats," a large padded sun deck, lovely cabin, etc. The price has been reduced from $3200, to only $595 because it is being sold without an engine or trailer. This boat is one of the safest, most sea-worthy boats ever made, which is why it is owned by a "Safe Boating Marine School" instructor. It can handle the treacherous Merrimac River with the "best of the boats."

FOLDING, WATERPROOF CHARTS -- I'm selling THREE charts for the price of one, and all are NEW and unused. (They retail for $19 each, but I'll give you FOUR, for the price of one, which is a $60 value for only $19, while they last. (I only have about six of each left.)
1) Moosehead Lake Maine (North and South charts)
2) Sebago Lake Maine
3) Lake Winnipesauke

Navigational tools for sale. . .all are new and at half-price

NEW: New parallel ruler with a locking device: This is in a compact size that is particularly suited for use on modern small chart tables. All the features of standard parallel ruler but it fits in the pocket and is easier to use. Enables transfer of GPS positions rapidly, easily and accurately to any paper chart. Locking knob enables the two rulers to be fixed in any given separation which allows rapid determination of GPS position. Two sets of finger holes enable fingertips to act as friction pads on underlying chart. Only $13.95 (Reg. $29.99)

NEW: "Light Ruler" (boat light identification) This is a "slide ruler," designed to identify vessels, easily, at night, using this valuable reference card. It shows views of a vessel's Port, Starboard, Bow and Stern lights, and it identifies 60 light configurations. It also displays audible signals. Comes with vinyl sleeve and magnifying lens. Only $ 13.99 each (Reg. price is $29. You may want to get both, for a flat $25 total.

NEW: Rules of the Road "slide ruler." This is a "slide ruler" that identifies the most common U.S. aids to navigation, rules of the road, plus maneuvering and warning signals for U.S. waters. This simple-to-use identification tool takes a large amount of complex information and makes it easy to understand and quick to refer to. Only $ 13.99 each (Reg. price is $29) Same sliderule design as the one above.

NEW: "Dividers," with a red LED light built into each leg for use in low light conditions. New innovative design for day and night use. New innovative design for day and night use. Center adjustment mechanism allows quick, precise operation. Tool functions as both a compass and divider. Battery lasts approximately 20 hours with lights on. Uses one CR1220 battery. Spare point, lead and knob provided. Complete instructions included in package. Only$14.95 (Reg. $39.95)

BELOW, are other things that are available, at low cost, for quick sale:
A NEW, deluxe "folding walker" with all options: Guardian brand folding walker, Model SM7884A, with 6 inch wheels, that greatly reduce the shock of bumpy terrain. There is a "pull-up," on the seat handle for easy folding, and it has a nice seat with a detachable wire basket. It also has handles that point to the back, to give more comfort in walking. Used less than three times, so it's in NEW condition. It sold for $350, plus shipping and handling, but only $95 will own it.

Contact: 9782025710

• Location: Boston

• Post ID: 28043166 boston

Play it safe. Avoid Scammers.

As a precaution, email contact has been disabled in this category because of scam attempts. If this ad does not contain a working phone number, web address, or the poster has forced their email address into the ad, the chances of it being legitimate are very low.

Most of the time, transactions outside of your local area involving money orders, cashier checks, wire transfers or shipping (especially overseas shipping) are scams or frauds.

Report all scam attempts to is an interactive computer service that enables access by multiple users and should not be treated as the publisher or speaker of any information provided by another information content provider. © 2017